3D Analysis: Transformations
All transformation settings of the scan images can be found in the Transformation Panel of the Right Sidebar as shown in figure 1. By clicking the button of the sidebar you can toggle the panel accordingly.
The content of the Transformation Panel is categorized in four groups that will be described in the following subsections.
Crosshairs
Step Value Specify a step value that determines the distance by which the crosshairs will move when using the designated crosshair buttons. To reverse the movement direction, enter a negative value. |
|
Move crosshairs forward (next impulse) Pressing this button will move the crosshairs forward along the X-axis by the specified step value. |
|
Move crosshairs backward (previous impulse) Pressing this button will move the crosshairs backwards along the X-axis by the specified step value. |
|
Move crosshairs left (next scan line) Pressing this button will move the crosshairs left along the Y-axis by the specified step value. |
|
Move crosshairs right (previous scan line) Pressing this button will move the crosshairs right along the Y-axis by the specified step value. |
|
Move crosshairs up (decrease depth) Pressing this button will move the crosshairs up along the Z-axis by the specified step value. |
|
Move crosshairs down (increase depth) Pressing this button will move the crosshairs down along the Z-axis by the specified step value. |
|
Reset crosshairs Push this button to reset all applied crosshairs transformations. |
Rotation
Rotation Value Enter an angle value in degrees, that is used to rotate the current scan image by using one of the following rotation buttons. Any negative value reverses the rotation. |
|
Rotation around X-axis Push this button to rotate the current scan image by the entered rotation value around the X-axis. |
|
Rotation around Y-axis Push this button to rotate the current scan image by the entered rotation value around the Y-axis. |
|
Rotation around Z-axis Push this button to rotate the current scan image by the entered rotation value around the Z-axis. |
|
Reset Rotation Push this button to reset all applied rotations. |
Translation / Move
Translation Value Enter a value in pixels, that is used to move the current scan image by using one of the following translation buttons. Any negative value reverses the translation. |
|
Move Upwards Push this button to move the current scan image by the entered translation value upwards. |
|
Move Left Push this button to move the current scan image by the entered translation value to the left. |
|
Move Downwards Push this button to move the current scan image by the entered translation value downwards. |
|
Move Right Push this button to move the current scan image by the entered translation value to the right. |
|
Reset Translation Push this button to reset all applied translations. |
Scale / Zoom
Scale Value Select a zoom value from the list to scale the current scan image according to that percentage. |
|
Scale Depth Down Push this button to decrease the visible height of the depth values of the current scan image on screen. |
|
Scale Depth Up Push this button to increase the visible height of the depth values of the current scan image on screen. |
|
Scale Down Push this button to decrease the size of the current scan image on screen. |
|
Scale Up Push this button to increase the size of the current scan image on screen. |
|
Reset Scale Push this button to reset all applied scales. |