OKM eXp 5500 | Using the VLF PentaCoil

---

Step-by-Step Guide

1. Attaching the PentaCoil to the Telescopic Rod: Frank shows how to properly attach the coil to the telescopic rod, making sure everything is lined up and securely fastened with the nylon nut for safe use.

2. Adjusting the Telescopic Rod for Comfort: Next, Frank demonstrates how to adjust the rod to your preferred height for comfortable swinging, keeping the coil level with the ground.

3. Connecting the Probe Cable: Once the rod is adjusted, Frank secures the probe cable with velcro and shows how to connect it, ensuring a tight and secure fit for accurate readings.

4. Configuring the VLF Scan: Frank then guides you through configuring the VLF's settings, allowing you to choose the optimal frequency for your target area—whether you’re after metals or natural ores.

5. Ground Balance Calibration: He explains the importance of ground balancing and demonstrates how to perform this step for accurate results, with a simple countdown timer guiding the process.

6. Scanning for Targets: Finally, Frank scans the test area, demonstrating how to detect a target, adjust sensitivity, and confirm a signal—proving the OKM eXp 5500 Pro’s effectiveness in action.

Ready to Start Detecting with Confidence

We hope this tutorial has helped you get the most out of your OKM eXp 5500 and VLF PentaCoil. With Frank’s guidance, you now have the knowledge to set up and fine-tune your detector for success. Remember, proper preparation is key to finding the best targets. Always refer to your user manual, and if you have any questions, don’t hesitate to reach out to our support team. Stay tuned to our YouTube channel for more tips and happy detecting! We look forward to hearing about your discoveries.

---

---